Know more about Netgear Nighthawk Extender Setup – (AC1900) EX7000

netgear nighthawk ac1900 setup

Netgear Nighthawk extender setup (AC1900) EX7000 boosts your existing wireless network range and delivers a dual-band uninterrupted WiFi speeds up to 1900 Mbps. As a matter of fact, Nighthawk combines the excellent and outstanding range with maximum and continuous WiFi performance.

Without any issue, it works easily with any standard WiFi router and moreover, it is ideal for HD video streaming and online gaming as well. So, with this smart Netgear WiFi extender get the whole-home WiFi connectivity you need for tablets, iPhones, smartphones, laptops, computers, and more.

Install your Netgear Nighthawk ac1900 and boost your existing WiFi range

The most common and easy way to use the netgear nighthawk ac1900 extender setup is to perk up the range of your existing home WiFi network. Conversely, you can also make use of your Netgear WiFi extender as an access point mode to create a new WiFi hotspot using an Ethernet connection.

Set up the Netgear extender’s hardware

To set up your extender’s hardware:

  • Attach the rubber feet or the stand.
  • After that, attach the antennas as well.
  • Turn on your range extender.
  • Place your extender close to your Netgear WiFi router. If you have a WiFi router of some other brand, then you can also use it because this smart Nighthawk extender is compatible with any WiFi router.
  • Plug your Netgear Nighthawk device into a power outlet. Push the Power button (if necessary). As soon as you do this, the Device to Extender – Link Rate LED lights amber and Netgear LED lights white and turn off automatically.

Use the WPS process to connect your Netgear WiFi extender to the existing wireless router

You can use the WPS method to connect your Netgear extender to your existing router without typing the router’s SSID (network name) or WiFi password.

netgear nighthawk ac1900

Using WPS Method:

  • Make sure your range extender is properly powered on.
  • Press the WPS button on your Nighthawk extender.
  • Device to Extender LED and the Link Rate LEDs both will blink green for 2-3 minutes.
  • Within one minute – on your WiFi router – press the WPS button.
  • If your router supports the 5 GHz band, repeat the 1st and the 2nd step and connect your range extender to the 5 GHz band.
  • Unplug your Nighthawk extender and place it to a new location that should be halfway between your WiFi router and the area with a poor WiFi/internet signal.
  • Plug your Netgear Nighthawk extender into a power outlet.
  • It is also recommended to use the Link Rate LEDs that will help you choose a spot/place/location where the extender-to-router connection is optimum/perfect/best.
  • If your router’s Link LED does not light green or amber, plug your range extender into an outlet that is closer or in reach of your WiFi router.

To prevent any issues Netgear Nighthawk extender setup – (AC1900) EX7000 process, ensure that the firmware on your extender and the router is up-to-date.

Use an internet browser to connect the Netgear Nighthawk extender (AC1900) EX7000 to your WiFi router

Use an appropriate/suitable web browser to log in to your extender and set up its internet connection to your main WiFi router:

  • Connect a laptop or computer to the extender using a wired or WiFi connection.

WiFi

On your WiFi-enabled device (computer or laptop), open the WiFi connection manager.

After that, locate and connect to the extender’s WiFi network known as Netgear_Ext.

Ethernet

Using an Ethernet cable, connect the Ethernet port on your extender to the Ethernet port on your computer or laptop.

On a computer, laptop, tablet, or a smartphone, load up the WiFi connection manager and connect to your range extender’s WiFi network Netgear_Ext. Once you are successfully connected to your WiFi extender, the Device to Extender LED will become solid green.

  • Head towards your internet browser.
  • When the first time that you log in to your range extender, the Netgear Genie setup page will display.
  • If the web page doesn’t display the setup page, open a new internet browser and enter www.mywifiext.net web address into the field of the browser’s address bar.
  • Follow the simple and easy to execute on-screen prompts to connect your Nighthawk extender to your main WiFi network.
  • Once you are done with the setup and installation process of your Netgear device successfully, unplug your Nighthawk device and place it to a new location.

Installation of the range extender as an Access Point (AP)

As a matter of fact, you can cable your smart WiFi range extender to your existing WiFi router and after that, set up your Netgear device i.e. the extender in an access point mode to create a new powerful WiFi hotspot.

netgear nighthawk ac1900 Setup

To use the range extender in AP (access point) mode:

  • Grab an Ethernet cable to connect your main router to the Ethernet port on the Netgear extender.
  • Then, plug your extender into an electrical outlet and after that, power it on.
  • Connect to the Netgear_Ext (SSID) WiFi network using a WiFi network manager on your laptop or desktop.

Note this down that in access point (AP) mode, you can easily connect your computer or laptop to the extender using a WiFi connection only.

  • Load an internet browser.
  • Type the IP address of your extender (default) into the address bar.
  • Then, simply follow the on-screen prompts and connect your range extender to your existing WiFi network like a pro.

If you have any query related to the Netgear Nighthawk setup process of your WiFi range extender, simply give us a call on our toll-free number 1-888-572-1134 and get rid of the issues instantly you are facing.

Tags: ,
Disclaimer: nighthawksetp.com is a self-directed team of experts and years of experience in handling extender and routers related issues. All logos, brand names, images and trademarks used in the website are for referential purpose only.