Netgear Nighthawk AX5400 Setup: A Detailed Guide

Netgear Nighthawk AX5400 Setup guide

Got your hands on a Netgear Nighthawk AC5400 router? Let’s tell you that this is one of the best routers available today. To get benefitted from its WiFi signals, you first need to perform its setup at your home. Performing a setup implies configuring it and connecting to home network so that you can connect to its network. This post will help you through the setup process of your Netgear AX5400 router with some easy to follow steps.

How to Set Up Netgear Nighthawk AX5400?

A Netgear router setup can be done in two ways. Either use its web interface on a browser or make use of the mobile app. Both ways are easy and can be done without much technical knowledge. All you need to do is carefully read this post and follow the instructions that we’ve discussed here.

Trust us; you’ll carry out the Netgear Nighthawk AX5400 router without getting stuck anywhere if you carefully follow this post. Let’s get started without any further delay.

Netgear Nighthawk AX5400 Setup: Before You Begin

Whether you use the web interface on a browser or use the Netgear Nighthawk app, you need to get a few things ready beforehand. Here are those:

  • Ensure that your router has the default factory settings running on it. If it is an old router, then reset it first.
  • Get one or two LAN cables that you’ll need while making connections.
  • Update the internet browser on your computer or laptop. Besides clear out its cache.
  • If you’re planning to use the mobile app, then download and install the Netgear Nighthawk app on your phone.
  • Bring your Netgear Nighthawk AX5400 router in the same room as the modem or DSL gateway.
  • Power down the modem for some time.

AX5400 Setup Web-Based Interface

In this, you make use of a browser on your computer or laptop to carry out the step steps. Use these instructions now.

  • With the help of a LAN cable, join the Netgear router to the modem or DSL gateway.
  • Supply power to the internet modem first and then the router. Follow the same sequence while turning on the devices to avoid any issues.
  • Now, get your computer or laptop connected to the router’s network. Find the default SSID of your router on a label on it.

Pro Tip: We recommend connecting your PC using a LAN cable during the setup process. This reduces the chances of signal disconnections and interruptions in the process.

  • As soon as you join the router’s network, the Netgear router setup page will open up on its own. If it doesn’t open, then visit on a browser.
  • Use the default admin username and password to log in if you’re prompted to do so.

Note: The default username for Netgear Nighthawk AX5400 router is admin and the default password is password.

  • 6. Upon logging in, keep on executing the setup prompts that you see on the screen.

This way you can set up your Nighthawk AX5400 router using the web based interface.

AX5400 Setup Using Nighthawk App

  • Have your Netgear router and the modem placed in the same room.
  • Join the devices using a LAN cable.
  • Connect your phone to the router’s WiFi.
  • Run the Nighthawk app.
  • Follow the prompts on the screen and complete the Netgear router setup.

Nighthawk App

Netgear Router Setup Done! What Now?

  • Relocate the router to a new location where you want to connect to its WiFi. You ought to place it within the range of the modem if you’re planning to make a wireless connection between them. Apart from that, you should keep the router away from other networking devices, Bluetooth devices, technical gadgets, home appliances, etc. to prevent signal interference.
  • We also suggest you check for firmware updates for your router. If there is an update ready, then install it on the router right away. This enhances the router’s performance, improves its security and adds new features to it. Thus always ensure timely updates for the router.
  • If you did not update the router’s admin and WiFi passwords during the setup process, then do it now by logging in to it. This is to ensure the security of your network.

To Briefly Conclude

After you have set up the Netgear Nighthawk AX5400 router, you can connect to its network. You will have a seamless internet connection in your home now. With the hope of providing you with sufficient information onNetgear router setup, here we put a full stop to our helpful post.

Tags: , , ,
Disclaimer: is a self-directed team of experts and years of experience in handling extender and routers related issues. All logos, brand names, images and trademarks used in the website are for referential purpose only. provides run time services to customers who approach directly via chat support or email.