Netgear AC750 Setup | EX3110

Optimize your existing home WiFi network and extend it to hard-to-reach places with Netgear AC750 WiFi range extender model EX3110. Once you are done with Netgear AC750 Setup, you will get the extended WiFi speed up to 750 Mbps.

If you don’t know how to set up the EX3110 WiFi extender, you have reached the right post. Here, you will learn different methods for Netgear AC750 EX3110 Setup. Let’s take the plunge.

Netgear EX3110 Manual

When you purchase a brand new AC750 EX3110 extender, you will get a manual in the package. This Netgear EX3110 Manual contains a series of setup steps from starting to end. All you have to do is simply walk through these installation steps and make your extender up and running within minutes.

However, understanding the Netgear EX3110 Setup instructions is very difficult for regular users. The best way to install your WiFi extender with great ease is to get in touch with our professionals. They will guide you each and every step and set up your extender properly.

Netgear EX3110

Well, if you have lost the AC750 manual and want to set up your extender on your own, go through the below-given installation steps.

Netgear EX3110 Setup Using Installation Assistant

To use the installation assistant for Netgear EX3110 Setup, all you need is to consider the following instructions:

  • Turn on your AC750 WiFi range extender (EX3110).
  • Place the EX3110 extender and your WiFi router in the same room.
  • After that, plug the extender into an electrical outlet.
  • Launch a web browser and enter www.mywifiext.net.
  • The Netgear EX3110 installation assistant comes into view.
  • Follow the setup instructions displayed on the screen.
  • Move your extender to a new location in your home or office wherever you want.
  • If you get no connection or a poor connection, move the AC750 extender closer to your router and try again until the LED lights become stable.
  • After you find the best location for your extender, connect your client devices to the extended WiFi network.
  • All four LED lights on your AC750 EX3110 WiFi range extender must be solid green. Only this confirms that your extender has been set up properly.

Netgear WiFi Extender EX3110 Setup Via WPS

Found the aforementioned setup method a bit difficult? Don’t worry! You can also use WPS or WiFi Protected Setup method for Netgear WiFi extender EX3110 Setup.

Netgear WPS method

Here’s how to setup Netgear EX3110 AC750 extender using WPS method:

  • Power on your AC750 EX3110 wireless extender.
  • Place your extender and WiFi router in the same room.
  • Once done, plug the extender into an electrical outlet.
  • Press the WPS button on the extender.
  • Now, press the WPS button on your WiFi router.

Note: If your router supports the 5 GHz band, your EX3110 extender attempts to connect to the router’s 5 GHz band the first time you press the WPS button. If your extender did not connect to the router’s 5 GHz band the first time, it may result in a lot of issues during Netgear AC750 EX3110 WiFi range extender setup. 

  • Move your extender to a new location in your home or office.
  • Take your WiFi-enabled computer or mobile device to the location with poor WiFi router coverage.
  • Connect your device to the extended network.

That’s how you can complete your Netgear Extender EX3110 Setup using WPS button.

Netgear AC750 Model EX3110 Setup Using Nighthawk App

Users can also make use of the Netgear Nighthawk app to install their AC750 EX3110 WiFi range extender and connect to the internet. This app is available for both major platforms i.e. Android and iOS.

Follow these steps to perform Netgear AC750 Model EX7300 Setup using the Nighthawk app:

Netgear Nighthawk App
  1. First of all, ensure that your router is providing an accessible internet connection.
  2. Note down the router’s SSID or network name and password.
  3. Now, turn on your extender.
  4. Download Nighthawk app on your Android or iOS device.
  5. After that, open the Nighthawk app on your smartphone.
  6. Follow the on-screen installation steps to set up your WiFi range extender and connect to the internet.

Netgear Model EX3110 Setup Issues

  • Mywifiext.net not working
  • WiFi extender is connected but no internet
  • WiFi connectivity issues
  • WiFi extender is not connected to the network
  • Incorrect mywifiext password
  • Netgear genie app doesn’t open
  • Issues while accessing 192.168.1.250 IP address
  • Can’t connect to mywifiext.local
  • The genie smart setup page continues to appear even after Netgear EX3110 setup
  • Can’t login to the extender
  • Forgot the extender’s default password
  • Extender’s LED lights are not stable
  • Mywifiext.com doesn’t open
  • EX3110 drops internet connectivity
  • Unable to update the firmware
  • MAC address filtering errors
  • The AC750 EX3110 is not working properly
  • Internet connected but not working
  • Can’t find the range extender network name
  • No Internet secured error
  • Netgear extender red light causing issues
  • Unable to perform the extender reset process

Troubleshooting Netgear AC750 EX3110 Setup Issues

Go through the below-mentioned troubleshooting steps to fix Netgear AC750 EX7300 setup issues:

  1. Make sure that the extender is receiving proper power supply from the wall outlet.
  2. Confirm that the wall plug in which the extender is plugged in is not damaged or short-circuited.
  3. Access high-speed internet connection on your device.
  4. Check all the wired connections. Do not use any damaged cable.
  5. Keep your extender away from walls, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal objects, aluminum studs, etc.
  6. If you are getting issues with mywifiext.net, be certain that you entered the correct URL in the address bar.
  7. Power-cycle your extender once and try to set it up again.
  8. Use only the latest version of web browser during mywifiext.net login.
  9. Update the latest firmware version on your extender.
  10. Reset the extender to its factory default settings.

Netgear Range Extender Setup EX3110 for FastLane

Netgear AC750 EX3110 extender supports FastLane Technology to provide you with maximum WiFi performance. Basically, it offers high-speed WiFi connection with a dedicated band connecting the WiFi router to your extender and a second band connecting the WiFi device and extender. Here’s how to perform Netgear range extender setup EX3110 for FastLane Technology:

Netgear Fastlane
  1. Turn on your EX3110 AC750 WiFi range extender.
  2. After that, open any web browser such as Microsoft Edge, Google Chrome or Internet Explorer.
  3. Type mywifiext.net in the address bar and press Enter key.
  4. Enter the username and password when the login window appears.
  5. Once logged in, click on ‘Do More’ and then on ‘FastLane’ option.
  6. Now, you will get two options: ‘Device-to-extender in 2.4 GHz only and extender-to-router in 5 GHz only’ and ‘Device-to-extender in 5 GHz only and extender-to-router in 2.4 GHz’.
  7. Select any option you like and click on the Save button.

Netgear EX3110 AC750 Firmware Update

Does your WiFi extender, all of sudden, start behaving weirdly? Is it not providing the required speed even after a successful Netgear WiFi range extender EX3110 setup? If yes, then update firmware on the extender right away.

Netgear Extender Firmware is a set of instructions integrated into the hardware device. Talking in a layman’s language, the extender firmware is basically an operating system specifically intended to run on your particular make and model number of the extender.

So make sure to have the latest firmware version on your extender. Here’s how to update the firmware on your AC750 EX3110 extender:

  1. First and foremost, turn on your WiFi extender.
  2. Open a web browser as per your choice.
  3. Enter mywifiext.net in the address bar and press enter key.
  4. Log in to your extender using the username and password.
  5. Go to the settings menu and click on Firmware Update option.
  6. Thereafter, click on Check button.
  7. If there is any new firmware version available, click on yes button for firmware upgrade.
  8. Now, wait for some time and let the EX3110 AC750 firmware update properly.
Netgear Firmware

That’s it! Your extender’s firmware has been updated. In the case of any difficulty, feel free to contact the experts at .

Disclaimer: Nighthawksetp.com is a self-directed team of experts and years of experience in handling extender and routers related issues. All logos, brand names, images and trademarks used in the website are for referential purpose only. Nighthawksetp.com provides run time services to customers who approach directly via chat support or email.