5 Ways to Fix PLP2000 Ethernet LED Solid Red Light Issue
Netgear is one of the best choices, not only for netizens, but for everyone who needs an uninterrupted internet connection their home. With this being said, PLP2000 is known as one of the most hit devices. However, a few errors can impact the performance of your device and Netgear PLP2000 Ethernet LED solid red light issue is one of them.
But, you don’t have to worry! We have got you covered! In this post, we will provide you one of the best troubleshooting tips that will help you resolve Netgear PLP2000 Ethernet LED solid red light issue in a jiffy. So, without much delay, scroll down a little!
PLP2000 Ethernet LED Solid Red Light Issue
The Fixes
Fix 1: The Power Socket
First of all, you need to ensure that the Netgear PLP2000 is getting a steady power supply from its power socket. So, to fix PLP2000 Ethernet LED solid red light issue:
- Change the wall socket (if it is damaged or fluctuated).
- The power socket should be in reach of your existing router.
- Powerline adapter must be firmly connected.
There are chances that by applying the important points listed above will fix the “PLP2000 Ethernet LED solid red light” issue, but if it doesn’t, you can head over to the next fix!
Fix 2: The Ethernet Port
So, have you changed the power socket but it didn’t fix the PLP2000 Ethernet LED solid red light issue for you? No problem! You need to check the Ethernet port on your PLP2000. The reason being, the Ethernet port on the adapter might not have a proper connection. If this is the reason, choose the other Ethernet port right away.
Doing so will somehow fix PLP2000 Ethernet LED solid red light issue for you.
If the issue still persist, give the next troubleshooting tips highlighted below a try.
Fix 3: The Extra Devices
If there are more than 4-5 known or unknown devices are accessing your PLP2000 WiFi network, the light on your PLP2000 tends to go red. So, if there are baby monitors, cordless phones, gaming consoles, or extension cords connected, you need to disconnect them all. Doing so will give you a streamlined internet connection. As a result, PLP2000 Ethernet LED solid red light issue will be fixed shortly.
Still getting the same issue? Don’t worry! The post is still left! If the above-mentioned fixes don’t help you out, you can give the rest of the fixes a try.
Keep scrolling down!
Fix 4: Hardware and Software of PLP2000
You may get PLP2000 Ethernet LED solid red light issue if the hardware of your device has become outdated. Yes, that’s right! An outdated hardware will surely going to adversely impact the PLP2000 performance and lead to the red light issue. So, update it right away.
Apart from this, you need to ensure that the PLP2000 device has been curated with the right software perfectly match with the model of your PLP2000 device. So, once are done with this fix, you will be able to troubleshoot the red light issue.
Before proceeding further, bear in mind that if you ignore the above-mentioned fix, you will not get a fix to troubleshoot PLP2000 Ethernet LED solid red light issue, but also you will face issues while performing the Powerline setup process.
Fix 5: The Frequency
If there are electronic devices like toys, treadmills, microwaves, etc. are active or operating around PLP2000 device, there are high chances that the frequency issues may lead you to experience the red light issue. So, to fix the issue, simply ensure your PLP2000 device isn’t surrounded by interference-creating electronic appliances. Doing so will resolve the frequency issue. And, if frequency issue is resolve, you will get a solution to fix PLP2000 Ethernet LED solid red light issue.
The Last Words
If nothing is working out to fix the PLP2000 Ethernet LED solid red light issue, then without much delay we suggest you to seek for a technical advice. This is because, being a non-techy, you will not be able to resolve the issue on your own. So, just lay your queries on us and get an instant fix to the annoying issue you are facing. Once the issue gets fixed, you will have no issue while accessing the internet.
Wishing you a happy experience with PLP2000!
Tags: Powerline setup